摘 要
为满足社会经济发展的要求,高层建筑不断的涌现,其高度和数量都飞速的增长着。高层建筑高度越高,其火灾危害性就越大,容易造成重大损失和人员伤亡事故,所以高层建筑消防安全设计是十分必要的,应该充分认识到消防设计在整个高层建筑中的重要作用。
论文介绍了设计建筑的工程概况,对所设计的高层建筑进行了分类和火灾危险等级的划分;在水力计算的基础上,主要完成了建筑的消火栓灭火系统和自动喷水灭火系统的设计,二者均采用临时高压供水。设水泵、水箱的消防给水方式。通过计算,确定消防水泵类型、水泵接合器数量、消防水箱的容量、减压孔板、气压给水设备的设置等内容。
关键词:高层建筑 消火栓灭火系统 自动喷水灭火系统
ABSTRACT
In order to satisfy the request of the social economical development, high-rise buildings emerge endlessly with high quantity and rapid growth. The higher the high-rise building is, the more devastation of the fire is, which tends to bring about heavy losses and large casualties. In this sense, it is very necessary to design the fire protection systems on the high-rise building. People should pay more attention to the system design of fire protection in high buildings.
The general situations of the designated building were briefly explained in this paper. The type of the given building and its dangerous grade of fire were determined. Based on the hydraulic calculation, the fire hydrant and the automatic sprinkler system were designed. The water supply mode of these two systems was occasional plenum mode. And both of these two systems install water pump and radiator. The radiator supplies the first ten minutes’ water. The type of water pump, the quantity of water pump adapter, the volume of the water tank, the location of the reduced-pressure orifice and the barometric equipment which supplies water were determined by the calculation.
Key words: High-rise Building; Fire Hydrant System; Automatic Sprinkler System; System
目 录
摘 要 I
ABSTRACT II
第一章 概 述 1
1.1 设计依据 1
1.1.1 技术规范 1
1.1.2 法律规范 1
1.2 消防给水系统概况 1
1.3 设计建筑概况 2
第二章 方案拟定 4
2.1 消防给水系统的分类 4
2.2 消防给水方式 4
2.3 系统选型 5
第三章 消火栓系统设计 6
3.1 室外消火栓系统设计 6
3.1.1 设计依据 6
3.1.2 室外消火栓的类型 6
3.1.3 室外消火栓的布置 7
3.2 室内消火栓系统设计 8
3.2.1 系统组成及主要设施 8
3.2.2 设计原则 10
3.2.3 室内消火栓给水系统的给水方式 12
3.3 室内消火栓系统设计计算 13
3.3.1 设计计算依据 13
3.3.2 建筑室内消火栓系统设计计算 17
第四章 自动喷水灭火系统 23
4.1 系统介绍 23
4.1.1 系统发展概述 23
4.1.2 设计依据 23
4.1.3 系统设置场所火灾危险等级 24
4.1.4 系统设计原则 24
4.2 系统组成 25
4.2.1 湿式自动喷水灭火系统 25
4.2.2 湿式自动喷水灭火系统组成 26
1.喷头 26
4.3 湿式自动喷水灭火系统布置 28
4.3.1 喷头的布置 28
4.3.2 报警阀组的布置 29
4.3.3 水流指示器的布置 30
4.3.4 管道布置 30
4.4 系统供水 31
4.5 系统水力计算 32
4.5.1 设计技术参数 32
4.5.2 喷头的布置 33
4.5.3 管径的选择 33
4.5.4 水力计算公式 34
4.5.5 水力计算 38
总 结 44
参考文献 45
第一章 概 述
完成建筑消防给水系统设计,主要参照以下法律法规,设计时本着基于规范高于规范的原则,根据建筑物的特殊情况选择合理、经济的设计方案的。

您当前的位置:
